ENGAutomatic Liquid fuel Heaters
These heaters are meant to burn liquid fuel and be installed in different locations where air heating is needed or where easily movable or quickly and easily installable heating is necessary. The heaters can produce heat from not only great quality liquid fuels but also fuels of bad quality. That is achieved by equipping heaters with different burners based on the needs of a customer.
In order to be able to get heat from almost any type of liquid fuel or if low and middle quality fuels are meant to be burned, the heaters are equipped with Probus Universal oil Burners.
If the only fuel that is going to be burned will be natural gas, diesel or any other specific heating fuel, then respective burners are added.
The heaters can provide heat to a room from one place or be supplied with air duct system, to distribute the heat to different places directly and faster.
Fuel: Waste oil, Motor oil, Vegetable oil, Diesel; Waste oils; Hydraulic oil; Transmission oil; and their mixtures.
Manufacturing time:
30 kW - 100 kW - 1 - 3 weeks
100+ kW - 250 kW - 2 - 4 weeks
250+ kW - 1 MW - 3 - 8 weeks
To find out more, contact us:
See Online Catalog
DSG - 30
Output (max): 30 kW
Electric Power supply: 220 V 50 Hz
Primary air supply: 0.2 - 0.4 bar (for fuel pulverization)
Warm air flow: 3200 m3/h
Fuel consumption (max): 2.8 kg/h
Maintenance: 1 - 2 times a month (depending on the fuel quality)
Warranty: 2 years
Heated area: 700 - 900 m3
Dimensions (width x depth x height): 51 x 88 x 175 cm
Weight: 125 kg
DSG - 80
Output (max): 80 kW
Electric Power supply: 380 V 50 Hz
Primary air supply: 0.6 - 0.8 bar (for fuel pulverization)
Warm air flow: 4000 m3/h
Fuel consumption (max): 7.1 kg/h
Maintenance: 2 - 3 times a year (depending on the fuel quality)
Warranty: 2 years
Heated area: 4000 - 5000 m3
Dimensions (width x depth x height): 54 x 90 x 190 cm
Weight: 170 kg
DSG - 50
Output (max): 50 kW
Electric Power supply: 220 V 50 Hz
Primary air supply: 0.6 - 0.8 bar (for fuel pulverization)
Warm air flow: 4000 m3/h
Fuel consumption (max): 4.3 kg/h
Maintenance: 2 - 3 times a year (depending on the fuel quality)
Warranty: 2 years
Heated area: 2000 - 3000 m3
Dimensions(width x depth x height): 740 x 1040 x 1420
Weight: 140 kg
DSG - 130
Output (max): 130 kW
Electric Power supply: 380 V 50 Hz
Primary air supply: 0.6 - 0.8 bar (for fuel pulverization)
Warm air flow: 7600 m3/h
Fuel consumption (max): 11.8 kg/h
Maintenance: 2 - 3 times a year (depending on the fuel quality)
Warranty: 2 years
Heated area: 6000 - 8000 m3
Dimensions (width x depth x height): 71 x 117 x 226 cm
Weight: 380 kg
Cart
Cart is empty.